Tungsten Carbide brazed Tips
Apejuwe ọja
Tungsten carbide brazed awọn imọran ti wa ni alurinmorin pẹlu irin, awọn carbide tipped lathe ọpa bit ti wa ni gbogbo lo fun orisirisi metalworking ohun elo pẹlu simẹnti irin, irin, alagbara, irin, nonferrous irin ati nonmetal, ati be be lo.
Sipesifikesonu Of Tungsten Carbide brazed Tips
| Ipele | Iwọn ISO | Lile (HRA) | Ìwúwo (g/cm3) | TRS (N/mm2) | Ohun elo |
| CR03 | K05 | 92 | 15.1 | 1400 | Dara fun ipari ti irin simẹnti ati irin ti kii ṣe irin. |
| CR6X | K10 | 91.5 | 14.95 | 1800 | Ipari & ologbele-ipari ti irin simẹnti ati awọn irin ti kii ṣe irin ati tun fun ẹrọ ti irin manganese ati irin lile. |
| CR06 | K15 | 90.5 | 14.95 | Ọdun 1900 | Dara fun roughing ti simẹnti irin ati ina alloys ati ki o tun fun awọn milling ti simẹnti irin ati kekere-alloy irin. |
| CR08 | K20 | 89.5 | 14.8 | 2200 | |
| YW1 | M10 | 91.6 | 13.1 | 1600 | Dara fun ipari ati ologbele-ipari ti irin alagbara ati irin alloy mora. |
| YW2 | M20 | 90.6 | 13 | 1800 | Awọn ite le ṣee lo fun ologbele-ipari ti irin alagbara, irin ati kekere alloy, irin ati awọn ti o ti wa ni o kun lo fun awọn ẹrọ ti Reluwe kẹkẹ hobu. |
| YT15 | P10 | 91.5 | 11.4 | 1600 | Dara fun ipari ati ipari-ipari fun irin ati irin simẹnti pẹlu iwọn ifunni iwọntunwọnsi ati dipo iyara gige giga. |
| YT14 | P20 | 90.8 | 11.6 | 1700 | Dara fun ipari ati ologbele-ipari ti irin ati irin simẹnti. |
| YT5 | P30 | 90.5 | 12.9 | 2200 | Dara fun iṣẹ ti o wuwo ti o ni inira ti yiyi ati irin simẹnti pẹlu iwọn ifunni nla ni alabọde ati iyara kekere labẹ awọn ipo iṣẹ ti ko dara. |
| Iru | Awọn iwọn (mm) | ||||
| L | t | S | r | a° | |
| A5 | 5 | 3 | 2 | 2 | |
| A6 | 6 | 4 | 2.5 | 2.5 | |
| A8 | 8 | 5 | 3 | 3 | |
| A10 | 10 | 6 | 4 | 4 | 18 |
| A12 | 12 | 8 | 5 | 5 | 18 |
| A16 | 16 | 10 | 6 | 6 | 18 |
| A20 | 20 | 12 | 7 | 7 | 18 |
| A25 | 25 | 14 | 8 | 8 | 18 |
| A32 | 32 | 18 | 10 | 10 | 18 |
| A40 | 40 | 22 | 12 | 12 | 18 |
| A50 | 50 | 25 | 14 | 14 | 18 |
| Iru | Awọn iwọn (mm) | ||||
| L | t | S | r | a° | |
| B5 | 5 | 3 | 2 | 2 | |
| B6 | 6 | 4 | 2.5 | 2.5 | |
| B8 | 8 | 5 | 3 | 3 | |
| B10 | 10 | 6 | 4 | 4 | 18 |
| B12 | 12 | 8 | 5 | 5 | 18 |
| B16 | 16 | 10 | 6 | 6 | 18 |
| B20 | 20 | 12 | 7 | 7 | 18 |
| B25 | 25 | 14 | 8 | 8 | 18 |
| B32 | 32 | 18 | 10 | 10 | 18 |
| B40 | 40 | 22 | 12 | 12 | 18 |
| B50 | 50 | 25 | 14 | 14 | 18 |
| Iru | Awọn iwọn (mm) | |||
| L | t | S | a° | |
| C5 | 5 | 3 | 2 | |
| C6 | 6 | 4 | 2.5 | |
| C8 | 8 | 5 | 3 | |
| C10 | 10 | 6 | 4 | 18 |
| C12 | 12 | 8 | 5 | 18 |
| C16 | 16 | 10 | 6 | 18 |
| C20 | 20 | 12 | 7 | 18 |
| C25 | 25 | 14 | 8 | 18 |
| C32 | 32 | 18 | 10 | 18 |
| C40 | 40 | 22 | 12 | 18 |
| C50 | 50 | 25 | 14 | 18 |
| Iru | Awọn iwọn (mm) | ||
| L | t | S | |
| D3 | 3.5 | 8 | 3 |
| D4 | 4.5 | 10 | 4 |
| D5 | 5.5 | 12 | 5 |
| D6 | 6.5 | 14 | 6 |
| D8 | 8.5 | 16 | 8 |
| D10 | 10.5 | 18 | 10 |
| D12 | 12.5 | 20 | 12 |
| Iru | Awọn iwọn (mm) | |||
| L | t | S | a° | |
| E4 | 4 | 10 | 2.5 | |
| E5 | 5 | 12 | 3 | |
| E6 | 6 | 14 | 3.5 | 9 |
| E8 | 8 | 16 | 4 | 9 |
| E10 | 10 | 18 | 5 | 9 |
| E12 | 12 | 20 | 6 | 9 |
| E16 | 16 | 22 | 7 | 9 |
| E20 | 20 | 25 | 8 | 9 |
| E25 | 25 | 28 | 9 | 9 |
| E32 | 32 | 32 | 10 | 9 |
Aṣayan boṣewa pipe ti awọn imọran brazed tungsten carbide ni awọn iwọn pupọ wa, ati pe a tun funni ni awọn iṣẹ isọdi ni ibamu si awọn ibeere rẹ
Awọn ẹya ara ẹrọ
• Didara to dara ati iduroṣinṣin ti o da lori iṣakoso didara wa ti o muna
• Yara ifijiṣẹ da lori wa ga gbóògì agbara
• Atilẹyin imọ-ẹrọ ti o da lori ẹgbẹ imọ-ẹrọ ọjọgbọn wa.
• Nìkan ati rọrun lati ṣe iṣowo, lati fi akoko rẹ, owo ati agbara rẹ pamọ
Anfani
1. Gẹgẹbi olupese ISO, a lo awọn ohun elo ti o ga julọ lati ṣe iṣeduro didara ati awọn ohun-ini kemikali iduroṣinṣin.
2. O tayọ yiya-resistance ati High ikolu resistance.
3. Awọn ohun-ini kemikali iduroṣinṣin.Awọn irinṣẹ ti a ṣe lati ọdọ wa pẹlu igbesi aye gigun ati apẹrẹ pipe.
4. Pẹlu awọn ayewo didara ti o lagbara.Ṣiṣe idaniloju iwọn-iwọn ati didara ti o ni ibamu kọọkan ipele.
Tungsten Carbide Brazed Fi sii
Cemented Carbide Brazing Tips
Aṣa Carbide Welding Fi sii
K10 Tungsten Carbide Tips
Ohun elo
Fi sii Carbide Brazed Cemented jẹ lilo pupọ ni awọn aaye bii awọn ọkọ oju omi, awọn ọkọ ayọkẹlẹ, awọn irinṣẹ ẹrọ, gbigbe ọkọ oju-irin, ikole, ina ati awọn kemikali petrochemicals.
O le ṣee lo ni gige ati splicing ti awọn awo irin, itẹnu, irin simẹnti, irin oniho, awọn ile ati awọn ohun elo miiran;Fun apẹẹrẹ, ninu awọn iṣẹ ikole, awọn abẹfẹlẹ alurinmorin le ṣe iyara, deede, ati ipa to munadoko ninu awọn iṣẹ ṣiṣe ti o nilo awọn ọpa irin tabi gige awọn ohun elo irin, imudara iṣẹ ṣiṣe ati didara.
Išakoso didara wa
Ilana Didara
Didara jẹ ẹmi ti awọn ọja.
Muna Iṣakoso ilana.
Odo ifarada ti abawọn!
Ti kọja ISO9001-2015 Iwe-ẹri
Ohun elo iṣelọpọ
Lilọ tutu
Sokiri Gbigbe
Tẹ
TPA Tẹ
Ologbele-Tẹ
HIP Sintering
Ohun elo Ṣiṣe
Liluho
Waya Ige
Inaro Lilọ
Gbogbo Lilọ
Ofurufu Lilọ
CNC milling Machine
Ohun elo Ayẹwo
Mita lile
Planimeter
Idiwon Elementi Quadrat
Koluboti oofa Irinse
Maikirosikopu Metallographic
